CS29 Lifecolor Burned set (This set contains 6 acrylic colors)

Water soluble acrylic colours for modelling and hobby. LifeColor is excellent for paint brushing or airbrushing on plastic, resin, metal, vinyl, wood, cloth and ceramic.

This set contains 5 matt acrylic colours and 1 pot of powder pigment. The colours and pigments have been developed to create realistic and harmonious effects by mixing them together (see below for examples and guidance).

This set includes:

• UA 758 Blackened Umber
• UA 759 Exhausted Umber
• UA 760 Rusted Umber
• UA 761 Burned Stains
• UA 762 Incinerated White 
• PG 117 Ash - Pigment

(Below) Examples using the LifeColor Burned set

Using LifeColor Acrylics

1. Clean surfaces to be painted
2. For airbrushing, dilute the colour to a milky consistency using water or LifeColor Thinner.
3. Airbrush at very low pressures.
4. Apply colour in thin coats with a brush or airbrush
5. Allow to dry completely between coats
6. Clean your airbrush with airbrush cleaner and flush through with water

Using LifeColor Pigments: 
LifeColor Pigments can be mixed with water, alcohol or other solvents and turpentine or white spirit for oil paints. Apply the mixture with a brush or an airbrush that has at least a 0.3 needle and nozzle setup due to the thickness of the pigment. You can also apply the pigments with a dry brush obtaining shades of dirt or dust. By mixing colours and pigments you can obtain a dense paste for simulating 3D effects, which can be very useful painting tracks or simulating rust.